Dynacord PCL 1125T Specification Sheet

ENGLISH
PARAMUS Contractor Line - PCL Series
C O M PA C T C O M M E R C I A L P O W E R A M P L I F I E R S
Features
• Five models available from 160 to 450 watts per channel;
4 ohms or 50 / 70 / 100 V
• Compact 2 RU enclosure
• Phoenix style input connectors for easy installation
• Phoenix style connector block for all output modes
• Bridge mode operation on all multi channel models
• Switch selectable hi-pass filter at either 50 Hz or 300 Hz
• Independent rear level controls for each channel
• Front-to-rear cooling
• Multitude of protections
With the new PARAMUS Contractor Line DYNACORD completes its
wide power amplifier range in the installation realm.
In particular, the power amplifiers are designed for demanding sound
reinforcement, background music / paging and public address system
installations. Long term reliability and flexibility is guaranteed.
The five models in the PCL series range from 160 to 450 watts of power
per channel in a variety of system designs.
PCL 1125T, PCL 1225T and PCL 1240T are equipped with high perfor-
mance output transformers and also provide floating outputs for 50 V,
70 V and 100 V installations in addition to low-impedance outputs at
8 / 4 ohms. PCL 1245 und PCL 1415 are low-impedance amplifiers
without output transformers.
Premium Phoenix style screw-lock connectors ensure a more secure
connection of audio signal and speaker cables. The independent rear
level controls allow setting the according power amp channel's overall
amplification. All PCL power amps feature different hi-pass filters with
switch selectable cut-off frequency to attenuate unwanted low-
frequency signals.
All models in the PARAMUS series provide several protection circuits
(short circuit, thermal overload, power up delay, peak current limiters,
among others), which not only prevent the power amplifier itself from
being damaged but can protect the connected loudspeaker systems as
well.
All PCL models offer excellent head-
room for a wide dynamic range on
music signals.
They also have voltage limiters to
protect the loudspeaker outputs
against high distortion.
The multistage cooling fan guaran-
tees absolute reliability.