Assembling The Blades - Hunter 21571 Owners And Installation Manual

Hunter fans use several styles of fan blade irons (brackets that hold the
blade to the fan).
6-1. Your fan may include blade grommets. If your fan has grommets,
insert them by hand into the holes on the blades.
6-2. Attach each blade to a blade iron using three blade assembly
screws. If you used grommets, the blades may appear slightly loose
after screws are tightened. This is normal.
6-3. Remove the blade mounting screws and rubber shipping bumpers
from the motor. Note: Some blade mounting screws are installed
in the motor to secure shipping blocks.
6-4. For each blade, insert one blade mounting screw through the
blade iron, and attach lightly to the fan. Insert the second blade
mounting screw, then securely tighten both mounting screws.
Note: The blades on this fan have been treated
with Hunter's Dust Armor protection, making
the blades less likely to attract dust and dirt.
Use a dry or slightly damp lint free cloth to
clean the blades. Do not use a furniture polish
or any other cleaners that leave any residue, as
they will damage the protective Dust Armor
on the blades.
Use with grommet
6 • Assembling the Blades 6 • Assembling the Blades
Blade Assembly
Screws
Use without grommet
11 11
42692-01 • 10/15/10 • Hunter Fan Company
Step 6-1 (Detail)
Grommet
Step 6-4
Blade
Mounting
Screw
Steps 6-1 – 6-2