Maxtor Central Axis Administrator User Manual page 87

If you're replacing the drive identified by the square, note that the right bracket is longer
Note:
than the other three brackets. You'll have to be careful to attach that bracket to the
corresponding side of the replacement drive.
Step 6: Disconnect the cable from the disk drive and carefully lift the disk drive from the
Step 7: Set the disk drive on the work surface and remove the four fasteners holding the
Configuring Drives (Dual Drive Units Only)
chassis:
Figure 128: Disk Drive Removal
mounting brackets to the disk drive:
Maxtor Central Axis Admin User Guide
84