Managing Printer Support - Maxtor Central Axis Administrator User Manual

Step 6: Click Done to return to the Configure USB Device page.
Step 7: Click Done to return to the Configure USB Device page and try to format the drive

Managing Printer Support

Printer support is enabled by default during the Central Axis software installation process.
If you want to connect a printer to your Central Axis, you must configure your unit with a
static IP address. For more information on how to set up a USB printer, go to
www.seagate.com and click Support > Troubleshooting.
To enable or disable printer support,
Step 1. Click USB Configurations on the Advanced Features page.
Setting USB Configurations
Figure 100: USB Formatting Successful
If the format is not successfully completed, a message notifies you and
recommends that you try again:
Figure 101: USB Formatting Unsuccessful
again.
If the format fails repeatedly, try another USB drive or contact Support.
Maxtor Central Axis Admin User Guide
66