Crosspoint Area - Panasonic AVHS400N - MULTI FORMAT LIVE SWITCHER Operating Instructions Manual

1. Functions in each area

1-2. Crosspoint area





3 PGM/A bus crosspoint buttons [PGM/A 1 to 10]
These are used to select the PGM/A bus video signals. In the case of the flip-flop system, the main line video
(PGM) signals are always selected.
4 PST/B bus crosspoint buttons [PST/B 1 to 10]
These are used to select the PST/B bus video signals. In the case of the flip-flop system, the images inserted
next (PST) are always selected.
5 AUX bus selector buttons [KEY, DSK, PinP, AUX]
Press the KEY button, DSK button, PinP button or AUX button to switch the bus which is selected using the
AUX bus crosspoint buttons (7). The indicator of the button that was pressed lights.
[KEY]: Press this button to switch the AUX bus crosspoint buttons to the key fill bus or key source bus.
(Each time the button is pressed, the key fill bus or key source bus is selected alternately. When the
key fill bus is selected, the indicator of the button lights in amber, and when the key source bus is
selected, it lights in green.)
[DSK]: Press this button to switch the AUX bus crosspoint buttons to the DSK fill bus or DSK source bus.
(Each time the button is pressed, the DSK fill bus or DSK source bus is selected alternately. When
the DSK fill bus is selected, the indicator of the button lights in amber, and when the DSK source bus
is selected, it lights in green.)
[PinP]: Press this button to switch the AUX bus crosspoint buttons to the PinP bus.
[AUX]: Press this button to switch the AUX bus crosspoint buttons to the AUX bus.
6 AUX bus dedicated crosspoint buttons [CLN, PVW, PGM]
These buttons are used to select the AUX bus source while the indicator of the [AUX] button is lighted. The
indicator of the pressed button lights in amber.
[CLN]: The clean signals (images whose DSK signals have been removed from the PGM signals) are
output to the AUX bus.
[PVW]: PVW signals are output to the AUX bus.
[PGM]: PGM signals are output to the AUX bus.
7 AUX crosspoint buttons
These buttons are used to select the source of the bus which was selected by the [AUX] bus selector button
(5).
F1 F2
AMB:FILL / GRN:SOURCE
KEY DSK PinP AUX
AUX BUS DELEGATION
AUX
PGM/A
1 2 3 4
PST/B
9
F3 F4 F5

CLN PVW PGM 1
AUX SOURCE
5 6 7 8 9
2
USER
10