Assembling The Blades - Hunter 21325 Owner's Manual And Installation Manual

Hunter fans use several styles of fan blade irons (brackets that hold the
blade to the fan).
6-1. Your fan may include blade grommets. If your fan has grommets,
insert them by hand into the holes on the blades.
6-2. Attach each blade to a blade iron using three blade assembly
screws. If you used grommets, the blades may appear slightly loose
after screws are tightened. This is normal.
6-3. Remove the blade mounting screws and metal shipping ring from
the bottom of the motor. Note: Some blade mounting screws are
installed in the motor to secure the metal shipping ring.
6-4. For each blade, insert one blade mounting screw through the
blade iron, and attach lightly to the fan. Insert the second blade
mounting screw, then securely tighten both mounting screws.
Blade
Mounting
Screw
Step 6-3 (Detail)
6 • Assembling the Blades
12
45037-01 • 06/06/11 • Hunter Fan Company
Step 6-1 (Detail)
Grommet
Use with grommet
Blade Assembly
Screws
Step 6-4
Use without grommet
Steps 6-1 – 6-2