Lexmark 2380 - Forms Printer B/W Dot-matrix Service Manual page 43

FRU
3 Carrier Motor
4 Main Logic Board
Action
If the home position sensor is OK, refer to the
table and make sure the resistance of the
carrier motor windings are from 1 to 5 ohms for
all printers.
238X-001,002,003
239X-002,003
CP9-1 & CP9-5
CP9-2 & CP9-6
CP9-3 & CP9-5
CP9-4 & CP9-6
If all parts appear OK but the Home Position
Error still occurs, replace the main logic board.
After replacing the main logic board or any
parts affecting the carrier, perform the
bidirectional print adjustment. See
"Bidirectional Print Adjustment" on page 4-5.
Diagnostic Information 2-19
239X-001
CP9-1 & CP9-6
CP9-2 & CP9-5
CP9-3 & CP9-6
CP9-4 & CP9-5