Scanning - Panasonic Panaboard UB-5310 Operating Instructions Manual

Computer Interfacing

■ Scanning

You can scan images on the screen to your
computer by operating Panasonic-DMS.
1
Click [Start], move the pointer to
[Programs]–[Panasonic]–[Panasonic
Document Management System]–
[Document Manager].
(For Windows XP, [All Programs] instead of
[Programs].)
• The Panasonic-DMS software runs.
2
Click the [File] menu, then click [Select
Source...].
3
Select [Panaboard UB5-7 USB TWAIN
Driver] and click [Select].
4
Click the [File] menu, then click [Acquire
Image...], or click the
the Toolbar.
• The Panaboard Operation Panel will appear.
Note
• When the Panaboard Operation Panel is not
displayed, check the USB cable connection
or the condition of the electronic board.
5
Click the
(2-Screen Scan) button.
• Scanning starts and the scanned image will
be displayed on the screen of the computer.
It is also possible to start scanning using the
Copy Key or 2-Screen Copy Key on the
electronic board.
20
(scanner) icon on
(Scan) button or the
6
Click [Close] on the Panaboard Operation
Panel to finish scanning.
• About the Document Manager, refer to the
Document Manager System operating
instructions in the CD-ROM.
Note
• Dragging the Panaboard Operation Panel using
the mouse or activating other software programs
during scanning may cause scanning troubles.