Picture/Audio Settings - Toshiba RD-XS34 Owner's Manual

Picture/Audio settings

PAL/Auto
HDD DVD-RAM DVD-RW
PAL:
To play a PAL disc. Connect a PAL TV to view a
picture.
Auto:
The recorder automatically identifies PAL or NTSC
video system of a disc. Connect a multisystem TV
(PAL/NTSC compatible) to view a picture.
A playback picture may be distorted when detected a
signal change between PAL and NTSC on the disc.
Note:
Alert message is displayed when detected both PAL
and NTSC video system on the same disc.
Pause/Still
HDD DVD-RAM DVD-RW
Auto:
Normal setting. Pause the moving image without
blurring.
Frame:
Displays high resolution still image.
Custom picture select
HDD DVD-RAM DVD-RW
Select from between 4 picture settings (Normal, Setting
1-3) you stored in the memory.
Custom picture setting
HDD DVD-RAM DVD-RW
You can adjust fine picture quality and store up to 3
custom picture settings in the memory of the recorder.
1) Press the /
setting from 3 settings, and then press the
ENTER button.
e.g.
Picture/Audio settings
PAL/Auto
Pause / Still
Custom picture select
Custom picture setting
Progressive conversion
Play DNR
Audio out select
Virtual surround
NICAM
RD-XS34SB_Ope_E_p149-164
DVD-R DVD-VIDEO VCD
DVD-R DVD-VIDEO
DVD-R DVD-VIDEO VCD
DVD-R DVD-VIDEO VCD
button to select a desired
PAL
Setting 1
Setting 2
Auto
Setting 3
Normal
Auto
Bitstream
Off
On
SETUP
157
2) Press the / buttons to select adjustable
items, and then press the
select each parameter.
Brightness
(0) Darker ⇔ Brighter (7)
Contrast
(–7) Lower ⇔ Higher (0)
Color
(–7) Duller ⇔ Brighter (0)
Edge enhance
(OFF) Normal ⇔ Sharp (ON)
3) After adjusting the items, press the ENTER
button.
Progressive conversion
HDD DVD-RAM DVD-RW DVD-R
There are two types of source content in pictures
recorded in DVD video discs: film content (pictures
recorded from films at 24 frames per second) and video
content (video signals recorded at 25 frames in PAL (30
frames in NTSC) per second). Make this selection
according to the type of content being viewed.
Auto:
Select this position normally.
The recorder automatically detects source content,
film or video, of playback source, and converts that
signal in the progressive output format in an
appropriate method.
Video:
The recorder filters video signal, and converts it in the
progressive output format appropriately.
Suitable for playback of video content pictures.
Film:
The recorder converts film content pictures in the
progressive output format appropriately.
Suitable for playback of film content pictures.
The progressive output feature will be most effective
under this selection.
Note
• Depending on the disc, pictures may be cut off or doubled.
12/18/04, 5:53 PM
/ buttons to
DVD-VIDEO VCD
157