Replacing The Msata Mini-Card; Procedure; Postrequisites - Dell dxcwrk1 - XPS - One Owner's Manual

31

Replacing the mSATA Mini-Card

WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 11. After working inside your computer, follow the instructions in "After
Working Inside Your Computer" on page 13. For additional safety best practices
information, see the Regulatory Compliance Homepage at dell.com/
regulatory_compliance.

Procedure

1 Align the notch on the mSATA mini-card with the tab on the mSATA
mini-card connector.
2 Insert the mSATA mini-card at a 45-degree angle into the mSATA
mini-card connector.
3
Replace the screws that secure the mSATA mini-card to the system board.

Postrequisites

1 Replace the system-board shield. See "Replacing the System-Board Shield" on
page 33.
2 Replace the back cover. See "Replacing the Back Cover" on page 21.
Replacing the mSATA Mini-Card
73
|