ViewSonic VA2016W - 20" LCD Monitor Service Manual page 11

29 1280 x 960 @
30 1280 x 960 @
31 1280 x 960 @
32 1280 x 1024 @
33 1280 x 1024 @
34 1280 x 1024 @
35 1440 x 900 @
36 1440 x 900 @
37 1600 x 1200 @
38 1680 x 1050 @
*1. Tolerance ≧ ±2KHz (if no overlapping issue)
*2. Any timing not in the list, it should display as normal or show on "OUT OF RANGE" OSD message without
blanking.
*3. The image quality of 50Hz mode might be worse than 75Hz.
Primary Presets
1680x1050 @ 60Hz
User Presets
Number of User Presets (recognized timings) Available: 10 presets total in FIFO configuration
Changing Modes
● Maximum Mode Change Blank Time for image stability : 5 seconds (Max), excluding "Auto
Adjust" time
● Under DOS mode (640 x 350, 720 x 400 & 640 x 400), it should recall factory setting when
execute "Auto Adjust"
● The monitor needs to do "Auto Adjust" the first time a new mode is detected
(see section "0-Touch™ Function Actions")
● While running Change Mode, Auto Adjust or Memory Recall, the image shall blank
ViewSonic Corporation
50 Hz, 49.4 KHz
60 Hz, 59.7 KHz
75 Hz, 75.2 KHz
50 Hz, 52.7 KHz
60 Hz, 64 KHz
75 Hz, 80 KHz
60 Hz 55.9 KHz
75 Hz 70.6 KHz
60 HZ 75.0 KHz
60 HZ 65.3 KHz
VESA
VESA
VESA
VESA
VESA
VESA
VESA
CVT
8
Confidential - Do Not Copy
VA2016w-2