2-6 FRONT PANEL CONTROLS AND INDICATORS
2-6-1 Front Panel Hardware Controls
Power Switch (Front Head)
Power LED (Front Head)
Front Panel Controls (Head)
[ ] [ 1 ] [ 2 ] [▲] [▼]
Reaction Time
2-6-2 Short Cuts Function from the button(s)
[1]
[2]
[▼]
[▲]
[▼]+ [▲]
[1] + [2]
[1] + [▼] + [▲]
(Keep pushing 5 sec)
[1] + [▲]
[1] + [▼]
ViewSonic Corporation
Power Control, soft Power Switch.
Blue – ON
Amber – Active Off
Dark = Soft Power Switch OFF
[ ] Power
[ 1 ] BUTTON 1
[ 2 ] Button 2
[▲] UP ARROW BUTTON
[▼] DOWN ARROW BUTTON
Note: Power Button, Button 1 and Button 2 must be
one-shot logic operation. (i.e. there should be no cycling)
OSD must fully appear within 0.5s after pushing Button 1
Main Menu
(refer to segment 4-6-3)
Auto Image Ajust
To immediately activate Brightness menu. It should be change to
Contrast OSD by push button [2]
(refer to the Brightness OSD in segment 4-6-3)
To immediately activate Contrast menu. It should be change to
Brightness OSD by push button [2]
(refer to the Contrast OSD in segment 4-6-3)
Recall both of Contrast and Brightness to default without OSD
message.
Toggle 720x400 and 640x400 mode when input 720x400 or
640x400 mode
White Balance
1. It will not shown on user's guide
2. OSD message as below,
(Image = no blanking)
OSD Lock
(refer to segment 4-6-4)
Power Lock
9
Confidential - Do Not Copy
VA2016w-2