Melitta 40791 Use & Care Manual page 7

840193102 ENv02.qxd:840135000 Ev00.qxd
How to Use
4
Holding handle securely, align locking
tabs of filter holder with the brew
head opening. Insert filter until it
slides all the way to the back and
cannot be pushed in any further.
6
Plug in and press the ON/OFF button
to turn unit on. The amber ON light
will illuminate. The ready light will
glow green when the water is heated
and unit is ready for use.
8
Turn the control knob to BREW
to begin the flow of espresso.
11/10/10 9:08 AM
(cont.)
5
Pull down on the lever handle to lock
the filter holder into place. The lever
will be locked when it is slightly below
horizontal and cannot be pushed
down any further.
7
Place one or two cups under brew
head spouts. If using one cup, use one
wide enough to catch espresso from
both spouts.
9
As espresso dispenses, it will gradually
look lighter in color. Allow espresso
to drip from filter holder for 15–20
seconds before removing cup(s). This
will make about 1–1.5 oz. of espresso
if using two cups or 2–3 oz. if using
one cup.
Page 7
7