Starting A Computer-To-Computer (Ad Hoc) Network Connection - NETGEAR WG111v3 - 54 Mbps Wireless USB 2.0 Adapter User Manual

NETGEAR 54 Mbps Wireless USB 2.0 Adapter WG111v3 User Manual
5. Verify wireless connectivity between your peer devices.
a. On the Windows taskbar click Start, and then click Run.
b. Assuming the target PC is configured with 192.168.0.1 as its IP address, type
192.168.0.1
Figure 2-9
c. This sends a continuous ping to the device with the 192.168.0.1 static IP address. The ping
response should change to "reply."
Figure 2-10
At this point the connection is established.
For more information about using ping, see
N101453.asp. If you cannot access network resources, the Windows Client and File and Print
Sharing software might not be installed and configured correctly. See
and TCP/IP Addressing" on page B-1

Starting a Computer-to-Computer (Ad Hoc) Network Connection

1. On the Settings tab, select or type the Network Name (SSID).
2. Select the Computer-to-Computer (Ad Hoc) network type.
2-12
and then click OK.
v1.0, March 2008
http://kbserver.netgear.com/kb_web_files/
ping -t
"Internet Networking