Connecting The Wireless Adapter; Using The Smart Wizard To Set Up Your Wireless Adapter - NETGEAR WG111v3 - 54 Mbps Wireless USB 2.0 Adapter User Manual

NETGEAR 54 Mbps Wireless USB 2.0 Adapter WG111v3 User Manual

Connecting the Wireless Adapter

After you have installed the NETGEAR Smart Wizard, the following screen displays:
Figure 1-2
1. Locate an available USB port on your computer.
Note: If you do not have a USB 2.0 port on your computer, the data rate of the
WG111v3 will be limited to the 14 Mbps of the USB 1.1 standard.
2. Insert the wireless adapter in a USB port on your computer.
To use the USB cable, connect it to the wireless adapter and a USB port. See
Adapter Cradle" on page
3. Click Next, and confirm the country where you are located.
The wireless adapter is automatically added with the installed driver.

Using the Smart Wizard to Set up Your Wireless Adapter

You can set up the wireless adapter with the NETGEAR Smart Wizard (recommended) or the
Windows configuration utilities.
• NETGEAR Smart Wizard: Reveals more information about each network and makes it
easier to troubleshoot network connection problems. See
page 1-8 and "Statistics Tab" on page
• Windows Zero Configuration Utility: See the Windows documentation or see the link to
"Windows XP and Vista Wireless Configuration Utilities" on page
1-4
1-10.
2-20.
v1.0, March 2008
"Placing the USB
"Smart Wizard Status Bar" on
B-1.