Basic Ip Settings - NETGEAR WAG302 - ProSafe Dual Band Wireless Access Point Reference Manual

NETGEAR ProSafe Dual Band Wireless Access Point WAG302v2 Reference Manual
4. Log on by using the default user name of admin and default password of password.
After you log on, the Web browser displays the General Information page as shown in
Figure 2-1 on page

Basic IP Settings

To configure the basic settings of your wireless access point:
1. Connect to the WAG302v2 and click Basic Settings in the Setup section of the WAG302v2
main menu. Figure 2-5
Rest of World
Figure 2-5
2. Enter the Basic Default Settings. The Basic Settings default settings below work for most
users and situations:
2-8
2-4.
shows the Basic Settings page.
v1.0, May 2006
US Only
Basic Installation and Configuration