[No.reset]; [Reset]; [Usb Mode] - Panasonic Lumix DMC-ZS19 Owner's Manual

• For details about the setting procedure in the [Setup] menu (→51)
Item

[No.Reset]

Reset picture file
numbers.

[Reset]

Reset to the default
settings.

[USB Mode]

Select communication
method for when
connecting camera to a
computer or printer with
USB connection cable.
DMC-ZS20
Update the GPS assist
data.
• The folder number is updated and the file number starts
from 0001.
• A folder number between 100 and 999 can be assigned.
Numbers cannot be reset once folder number reaches
999. In this case, save all necessary pictures to your
computer, and format the built-in memory/card (→60).
• To reset folder number to 100:
First, format the built-in memory or card, and reset the
file numbers using [No.Reset]. Then, select [Yes] on the
folder number reset screen.
[Reset Rec. settings?]
[Reset setup parameters?]
• Information registered in [Face Recog.] is reset if
recording settings are reset.
• Resetting the setup parameters will also reset the
following:
- Age in years/months and names in [Baby] and [Pet]
Scene Modes, [GPS] menu, [Map] menu
- Age in years/months and names in [Baby] and [Pet]
Scene Modes
DMC-ZS19
• Folder numbers and clock settings will not be reset.
• Camera movement may be audible as the lens function
is reset. This is not a fault.
[Select on connection]:
Select communication method each time you connect to a
computer or PictBridge-compatible printer.
[PictBridge(PTP)]: Select when connecting to a
[PC]: Select when connecting to a computer.
DMC-ZS20
[GPS assist data]: Update the GPS assist data. (→141)
- 58 -
Using the [Setup] menu
Settings, notes
PictBridge-compatible printer.
DMC-ZS20