Table of Contents
Advertisement
Creating a Disc Using a Connected
Blu-ray Recorder
You can create discs using a Blu-ray recorder by connecting
it to this unit using a USB cable.
1
Connect the USB cable and the AC adapter.
0 Turn off the camcorder by pressing the M button for
about 2 seconds.
To DC Connector
USB Cable
To USB Connector
.
A Connect using the provided USB cable.
B Connect the AC adapter to this unit.
0 This unit powers on automatically when the AC
adapter is connected.
0 Be sure to use the supplied JVC AC adapter.
0 The "SELECT DEVICE" screen appears.
2
Tap "CONNECT TO OTHER".
SELECT DEVICE
SELECT DEVICE
TYPE TO CONNECT
.
AC Adapter
To AC Outlet
(110 V to 240 V)
Blu-ray recorder
CONNECT TO OTHER
3
Tap the desired media.
CONNECT TO OTHER
SELECT MEDIA TO OPEN
BUILT-IN MEMORY
.
4
Perform dubbing on the Blu-ray recorder.
0 Refer also to the instruction manual of the Blu-ray
recorder.
Caution :
0 MP4(MVC) videos cannot be copied.
Memo :
0 The created discs are playable only on AVCHD
compatible devices (such as Blu-ray recorders).
0 Refer also to the following website.
http://www.jvc-victor.co.jp/dvmain/
Copying
SD CARD
75
Advertisement
Table of Contents
