Table of Contents
Advertisement
Playback
Adjusting Parallax During Playback
When playing back 3D images of scenes where there are
multiple objects arrayed in a line from near to far, or objects
that are extremely close to the camera, you can change the
way they appear to the eye.
0 Parallax can be adjusted when 3D or LR MIX images are
displayed on the unit's LCD monitor.
1
Tap k.
.
2
Tap "MANUAL".
AUTO
.
0 The parallax adjustment screen appears.
0 To set parallax adjustment to auto (default), tap
"AUTO".
3
Adjust the parallax.
SET
.
0 To increase the amount of correction, tap "+". Doing
so increases the value of the parallax display.
0 To reduce the amount of correction, tap "-". Doing so
decreases the value of the parallax display.
62
MANUAL
4
Tap "SET" to confirm.
SET
.
Caution :
0 Too much parallax may cause the 3D effect to be lost.
0 If you see double images even after parallax adjustment,
set the display on the TV to 2D immediately. In addition,
set the LCD monitor to 2D display accordingly.
Memo :
0 While this unit is equipped with the function to adjust
parallax automatically, it may not work properly for the
following subjects.
- Subjects beyond the recommended shooting distance
(especially subjects that are extremely close to the
camera)
- Numerous subjects of the similar shape arrayed in a line,
such as the windows of a building
- Straight subjects such as electric wires
In these cases, adjust the parallax manually.
0 When the power of this unit is turned off or the mode is
switched to recording after parallax is manually adjusted,
the "PARALLAX ADJUSTMENT" setting returns to
"AUTO".
Advertisement
Table of Contents
