Table of Contents
Advertisement
Assigning Functions to the USER
Buttons
This unit comes with three user buttons, [USER1], [USER2], and
[USER3].
A specific function can be assigned to each button according to your
preference.
AUTO MANUAL
CH-1
CH-2 INPUT
AUDIO INPUT
AUDIO
INPUT1
- LINE -
SELECT
- MIC -
INPUT2
MIC+48V
CH-2
INPUT1
INPUT2
AUTO MANUAL
FULL AUTO
A E
A F
M F
SET
SHUTTER
ADJ.
GAIN
WHT. BAL
IRIS
L-
B -
M-
A -
H-
PRST
.
Memo :
You can assign "FOCUS ASSIST", "TELE MACRO", and
0
"ZEBRA" respectively to the three user buttons, "USER1",
"USER2", and "USER3" in the recording menu. You can also
leave them unassigned. (A p. 63)
Tally Settings
You can select whether to enable the illumination of the tally lamp.
Set using "TALLY" in the common menu. (A p. 64)
When this is set to "ON", the tally lamp lights up in the recording
mode.
.
USER1
USER2
USER3
CAM/MEDIA
INFO
[USER3] button
[USER2] button
DOOR LOCK
[USER1] button
Tally Lamp
AWB
Tally Lamp
Adjusting the Touch Panel Button
Position
If the reactive area of the screen is misaligned with the touched area,
adjust the alignment between the button display position and the
reactive area.
Select "TOUCH SCREEN ADJUST" in the common menu.
0
1
Tap "MENU".
2
Tap "Q" (Common).
3
Tap "TOUCH SCREEN ADJUST".
COMMON
TOUCH SCREEN ADJUST
.
The touch screen adjustment screen appears.
0
4
Tap "+". (3 times in total)
PRESS THE + MARK
1/3
.
Keep tapping "+" as its position changes with every tap.
0
5
Tap "+" again to confirm the adjusted
positions. (3 times in total)
CONFIRM THE ADJUSTMENT
PRESS + MARK AGAIN
1/3
.
Keep tapping "+" as its position changes with every tap.
0
If areas on the adjustment screen other than the "+" mark
0
are tapped, errors will occur. In this case, try again from step
4.
Preparations
27
Advertisement
Table of Contents
