Table of Contents
Advertisement
Preparations
Preparation and Adjustment
Before Use
Attaching the Audio Unit
The audio unit (with handle) is not attached to the camera recorder
unit when purchased.
Attach the audio unit according to the following procedure.
1
Attach the audio unit by sliding it all the way
into the shoe on the top of the camera recorder.
2
Turn the screw on the audio unit clockwise to
fasten it fully and securely to the camera
recorder.
If the audio unit is not fully and securely tightened, it will be
0
loose and may drop off from the camera recorder during
use.
3
Connect the audio unit cable to the [AUDIO IN]
terminal of the camera recorder.
Screw
Shoe
.
Memo :
The cable of the audio unit cannot be fastened using a clamp.
0
The clamp is intended for fastening the microphone cable.
For details on mounting an external microphone and its settings,
0
refer to "Attaching an External Microphone".
22
Clamp
Cable
Open the cover
[AUDIO IN] terminal
Attaching an External Microphone
You can attach a microphone (optional) to the microphone holder.
1
Turn the knob on the microphone holder
anticlockwise to loosen and open the
microphone holder.
2
Place the microphone in the microphone
holder.
3
Turn the knob on the microphone holder
clockwise to secure the microphone.
4
Connect the microphone to the [INPUT1] or
[INPUT2] (XLR) terminal according to the type
of microphone cable terminal you are using.
5
Attach the microphone cable to the clamp.
6
Specify the audio input settings correctly.
For details on the method of audio input, refer to "Audio
0
Recording" (A p. 45).
Knob
Clamp
.
Microphone (Optional)
Microphone
Holder
[INPUT1/INPUT2]
Terminal
Advertisement
Table of Contents
