Enlarge The Focus Point (Display Focus Point); Switching The [Playback] Mode - Panasonic DMCFZ40 - DIGITAL CAMERA - ADVANCED FEATURES Operating Instructions Manual

Enlarge the focus point (display focus point)

This unit will remember the focus point during the recording, and it can be enlarged with
that point as a center.
Press [FOCUS] during image playback.
•
Focus point may not be the center of enlargement when it is
at the edge of the image.
• "
Refer to Using the Playback Zoom
during zooming.
•
It will return to the original enlargement if [FOCUS] is
pressed again.
•
Following pictures cannot be enlarged because there is no
focus point:
–
Picture that was taken without focusing
–
Picture that was taken with Manual Focus
– Picture that was taken with a different camera
1
Press [MENU/SET] during playback.
2
Press 1.
3
Press 3/4 to select the item and then press
[MENU/SET].
[NORMAL PLAY]
All the pictures are played back.
[SLIDE SHOW]
The pictures are played back in sequence.
[MODE PLAY]
Playback in [PICTURE], [AVCHD Lite]
¢1 This is the specification to record and playback high definition images.
[CATEGORY PLAY]
The pictures grouped together in categories are played back.
[FAVORITE PLAY]
Your favorite pictures are played back.
¢
[FAVORITE PLAY] is not displayed when [FAVORITE] has not been set.
2
"
(P58)

Switching the [PLAYBACK] Mode

(P56)
(P150)
(P152)
(P153)
¢
2
(P153)
Basic
for operation
¢1
, or [MOTION JPEG] can be selected.
- 59 -
W T