Toshiba M200 - Portege - Pentium M 1.5 GHz User Manual page 75

4 Select Hibernation for the options you want.
NOTE These options are set separately for how they operate while the
computer is running on battery power or while connected to AC
power.
When I press the power button
Set this option to Hibernate if you want the computer to
go into Hibernation mode when you press the power
button.
When I close the lid
Set this option to Hibernate if you want the computer to
go into Hibernation mode when you close the display
panel.
5 Click Apply.
6 Click OK.
NOTE For more information about the Power Saver utility, see
Power Saver" on page
Once the computer is configured, you can place it into Hibernation
mode by either pressing the power button or closing the display
panel, depending on the Hibernation options set.
Starting again from Hibernation mode
To start up the computer from Hibernation mode, press the power
button until the on/off light glows blue. The computer returns to the
screen(s) you were using.
If you put the computer in Hibernation mode by closing the display
panel, you can start it again by opening the display panel.
Getting Started
Turning off the computer
147.
75
"TOSHIBA