Configuring A 3G Network (3G Model) - ViewSonic ViewPad E100 User Manual

2.4

Configuring a 3G Network (3G Model)

Make sure the device is powered off before you install/uninstall an SIM card.
From the application menu, tap Settings > Wireless Networks > More > Mobile Networks.
• Data enabled: Select the check box to turn 3G on (enabled by default), then you can use
3G network.
• Data roaming: If you are in Roaming (out of the covered zone), please select the Data
roaming check box to build the data connect services.
• ACCESS Point Names: shows useful APN in your local area.
• Use only 2G networks: Please select the check box as using 2G network only
• Network operators: shows useful network operator list.
• If the device is connected to a 3G network, the 3G icon appears in the status bar.
12