Using The Menus; How To Use The Menus; The Image Adjustment Menu - Toshiba X3000AU - XGA LCD Projector Owner's Manual

Using the menus

You can call up on-screen menus, and conduct a number of adjustments and settings using
the operation buttons on the control panel (main unit side) and remote control.
p.16

■ How to use the menus

The menu shown below is for operation instructions purposes and might differ from the
actual display.
1. Press the MENU button
2. Select a Category
Select a category by using .
There are following 5 categories:
Image adjustment menu p.37
Display setting menu p.39
Default setting 1 menu p.42
Default setting 2 menu p.43
Status display menu p.44
3. Adjustments & Settings
Item
Adjustment/Setting Value
These marks signify
the items can be
adjusted/set by using
.
These marks signify the items can
be selected from the list by using
.
After an item is selected, apply it by
pressing .
• The figure shows displays given for operation instructions purposes. As the display may differ depending on the item,
use the following pages as a reference.
• To return to previous item, press the RETURN button.
4. End Press the MENU button.
(The menu disappears about 30 seconds after the last operation.)
Downloaded from www.Manualslib.com
Display the Setting display menu.
Displays the current
adjustments and
settings of selected
category.
Item shown with gray
cannot be adjusted with
the current input source.
Press or to open the menu.
These marks
signify that there
are options.
Press or
to display a list of
options.
* When no item is
changed, press
Toggle items with .
Select items with and press
Fix selection with .
36
manuals search engine

■ The image adjustment menu

Use this menu to set or adjust image-related items. Items that can be set or adjusted are
marked with "Yes", and those that cannot are marked with "No". (When an item is masked,
it indicates that you cannot select for the current input.)
Item
Contrast
Brightness
Color
Sharpness
Noise
reduction
NCE mode
/
R-level
/
These marks
G-level
signify that
there are setting
screens. Press
B-level
or to
display a list of
setting screens.
NTSC mode
Auto setting
.
Position
.
Description
Adjust the image contrast.
Lower Higher
Adjust the brightness of the image.
Darker Brighter
Adjust the color of the image.
Lighter Deeper
Adjust the sharpness of the image.
Softer Sharper
Set the function to reduce screen noise.
*1 On (Enable) Off (Disable)
Press . Toggle the NCE mode with
. 1/2/3
Adjust red of the image color.
Less red More red
Adjust green of the image color.
Less green More green
Adjust blue of the image color.
Less blue More blue
*2 Set the black level with .
US : NTSC (US) mode
JAPAN : NTSC (JAPAN) mode
Automatically adjusts items such as the
samplingphase depending on the type of
input signal.
Press then change mode using
and adjust with .
Phase
Adjust to eliminate flicker.
Frequency
Adjust to eliminate periodic patterns and
flickering when many fine vertical lines
appear on the screen.
H-position
Adjust the horizontal position of the image.
37
Camera
Computer Y/P /P Video S-video
B R
(XC3000)
Yes Yes Yes Yes Yes
Yes Yes Yes Yes Yes
No Yes Yes Yes No
Yes Yes Yes Yes Yes
No Yes Yes Yes No
Yes Yes Yes Yes No
Yes Yes Yes Yes Yes
Yes Yes Yes Yes Yes
Yes Yes Yes Yes Yes
No No Yes Yes No
Yes No No No No
Yes No No No No
Yes No No No No
Yes No No No No
Yes No No No No