Names Of The Terminals On The Rear Panel - Toshiba X3000AU - XGA LCD Projector Owner's Manual

3lcd data projector
Table of Contents

Advertisement

Names of the terminals on the rear panel

(1)
(2)
(3)
(4)
Name
(1) CONTROL terminal
(2) AUDIO (L/R) terminal
(3) VIDEO terminal
(4) S-VIDEO terminal
(5) AUDIO IN terminal
(6) COMPUTER 1 IN terminal
(7) AUDIO OUT terminal
(8) COMPUTER 2 IN terminal
(Also used for MONITOR OUT terminal)
(9) Switch
Downloaded from
www.Manualslib.com
(6)
(8)
(9)
(5)
(7)
: Main Function
: When operating the projector via a computer, connect
this to the controlling computer's RS-232C port.
: Input audio signals from video equipment.
: Input video signals from video equipment.
: Input S video signals from video equipment.
: Input audio signals from a computer, or from video
equipment with a component video signal output
terminal.
: Input RGB signal from a computer or other source or a
component video signal (Y/P
/P
) from video
B
R
equipment.
: Outputs audio signals.
: Inputs RGB signal from a computer or other source or
a component video signal (Y/P
/P
) rom video
B
R
equipment. It can also be used as MONITOR OUT
terminal by the switch of (9).
: Switches between COMPUTER 2 IN and MONITOR
OUT.
COMPUTER 2 IN
(Y/P
/P
2)
B
R
/MONITOR OUT
18
manuals search engine
Names of each part on the document camara
Name
Camera
p.59
(1) LED illumination
(2) Focus ring
(3) Camera lens
(4) Camera arm
(5) Infrared remote sensor
Control Panel
(6) 50/60 Hz switch
(7) CAMERA button
(8) CAMERA GAIN button
(9) LOCK (W.BALANCE) indicator : Lights when the white balance has been locked.
(10) W.BALANCE button
(11) LED LIGHT button
(models with a document camera)
(1) (2)
(3)
(4)
(6)
(7)
(8)
(5)
: Main Function
: The illumination LED for referring documents.
: Adjusts the focus.
p.47
: The camera lens of the document camera.
: Adjusts the camera angle.
p.45
: Senses commands from the remote control.
: Matches the shutter speed of the camera to your power
system frequency.
p.47
: Switches between the camera input and the previous
input.
p.46
: Adjusts the camera gain.
p.47
: Switches between auto and locking of white balance.
p.48
: Switches on/off the LED illumination.
19
(9)
(10)
(11)
(8)
p.46
p.48
p.46

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tlp-x3000Tlp-xc3000

Table of Contents