Connecting The Power Cord (Supplied) - Dukane 28A9017 User Manual

Connecting to Various Devices

Connecting the Power Cord (supplied)

After all devices have been connected, connect the supplied power cord.
1
Power cord (supplied)
● Since the power requirement of the projector is high, please insert the power plug directly into a wall outlet.
● When not using devices, remove the power cords from the wall outlets.
● Do not use power cords other than those supplied.
● Do not use a power voltage different from that which is indicated.
● Do not cut, tear or modify the power cords. Also, do not put a heavy object on, heat, or stretch the power cords, otherwise they
may be damaged.
● Do not insert or pull out the plugs with a wet hand.
Removing the Lens Cap
24
1.
2.
2
Cautions Against Fire and Electric Shock
Lens Cap
Connect the supplied power cord to the power input ter-
minal of the projector.
Insert the main plug of the supplied power cord into the
wall outlet.
(eg.)
When using the projector:
● Remove the lens cap.
❈ Be sure to fit the lens cap on when the projector is not in use to
keep out dirt.
❈ Please do not project with the lens cap on. The Lens cap may be
deformed by heat.