Setting Warm & Hold; Adjusting Oven Temperature - Kenmore 9746 - 30 in. Electric Range Use And Care Manual

Use and care guide
Hide thumbs Also See for 9746 - 30 in. Electric Range:
Table of Contents

Advertisement

Setting Oven Controls
Setting
Warm & Hold
TM
The Warm & Hold
TM
feature will keep oven baked foods
warm for serving up to 3 hours after cooking has finished,
After 3 hours the Warm & Hold
TM
feature will shut the oven
OFF automatically,
The Warm & Hold
TM
feature may be used alone or with any
other cooking operations or may be used after cooking has
finished using Cook Time and or Delay Start.
FOOD POISONING HAZARD. Do not let food sit for more
than one hour before or after cooking. Doing so can result
in food poisoning or sickness.
To set Warm & HoldTM:
Step
1.
PressWarm
& Hold.
2.
Press Start.
"HLd" for hold will appear
in the display (Fig. 1).
Press
W_rm&
Hold
@
To add the Warm & Hold
TM
feature to turn ON
automatically
after finishing
cooking:
.
.
3.
Arrange oven racks and place food
in oven. Set the the desired initial
cooking feature (for example Bake) with
a Cook Time or Delay Time.
Press Warm & Hold.
Press Start.
"HLd" for hold will appear
in the display (Fig. 1).
Warm&
liold
@
Fig. 1
The Warm & Hold
TM
feature will automatically turn the
oven OFF after being active for 3 hours.
Adjusting
oven temperature
Your appliance has been factory calibrated and tested to
provide accurate oven temperatures.
For the first few uses,
follow your recipe times and temperature recommendations
carefully. If you think the oven is cooking too hot or too cool
for your recipe times, you can adjust the oven control so
the oven cooks hotter or cooler than the temperature
displayed.
The oven temperature may be increased +35°F (+ 19°C) or
decreased -35°F (-19°C) from the factory settings.
Example:
increase the oven temperature
by 30°F:
Step
Press
1.
Press and hold Bake
for 6 seconds.
2.
Enter 30 degrees.
3.
Press Start.
Bake
®®
Example:
decrease the oven temperature
by 30°F:
Step
Press
1.
Press and hold Bake
Bake
for 6 seconds.
2.
Enter30.
@@
3.
Press Flex Clean for minus value,
c,oo.
4.
Press Start.
V
Oven temperature adjustments made will not affect the
Broil or Flex Clean feature temperatures.
If the temperature shows an adjustment of-30°F, and a
+30°F adjustment is needed, you can toggle between the
(-) or (+) in the display by pressing Flex Clean.
DO NOT USE oven thermometers such as those found in "
grocery stores to check the temperature settings inside
your oven. These types of oven thermometers
may vary
as much as 20 to 40 degrees from actual temperatures.
iii ............
..........
iii .........
27

Advertisement

Table of Contents
loading

This manual is also suitable for:

790.9746 series

Table of Contents