Battery Installation; Operating Range For Wireless Remote Control; Remote Control Precautions - Dukane 8761A User Manual

Portable lcd projector
Hide thumbs Also See for 8761A:
Table of Contents

Advertisement

Battery Installation

1
Remove the battery cover.
NOTE: Do not pull the battery
cover by force. Doing so can
result in it coming off.
2
1

Operating Range for Wireless Remote Control

7m/22 feet
30°
30°
Remote sensor on projector cabinet
• The infrared signal operates by line-of-sight up to a distance of about 22 feet/7 m and within a 60-degree angle of
the remote sensor on the projector cabinet.
• The projector will not respond if there are objects between the remote control and the sensor, or if strong light falls
on the sensor.
Weak batteries will also prevent the remote control from properly operating the projector.

Remote Control Precautions

• Handle the remote control carefully.
• If the remote control gets wet, wipe it dry immediately.
• Avoid excessive heat and humidity.
• If you will not be using the remote control for a long time, remove the batteries.
• Do not place the batteries upside down.
• Do not use new and old batteries together, or use different types of batteries together.
• Dispose of used batteries according to your local regulations.
2
Remove both old batteries and
install new ones (AAA). Ensure
that you have the batteries' po-
larity (+/ –) aligned correctly.
7m/22 feet
30°
30°
12
3
2
1
Remote control
1. Introduction
Slip the cover back over the bat-
teries until it snaps into place.
NOTE: Do not mix different types of
batteries or new and old batteries.

Advertisement

Table of Contents
loading

Table of Contents