PC Card Eject Button
PC Card Slot
Remote Sensor
(See page 12)
Rear Foot
AC Input
Connect the supplied power cable's
three-pin plug here, and plug the other
end into an active wall outlet.
(See page 26)
Monaural Speaker (2W)
Rear Foot
Rotate to make the projector level.
(See page 31)
Main Power Switch
When you plug the supplied power cable into an active wall
outlet and turn on the Main Power switch, the POWER
indicator turns orange and the projector is in standby mode.
(See page 28)
6
1. Introduction
Lamp cover
(See page 119)
Ventilation (outlet)
Lamp cover screw