Turn On The Machine; Wireless Setup - Brother HL-5470DW Quick Setup Manual

4

Turn on the machine

Important
DO NOT connect the interface cable
yet.
a
Connect the AC power cord to the machine and
then connect it to an AC power outlet.
b
Turn the machine's power switch on.
5

Wireless setup

(if needed)
For wireless setup using a Macintosh computer or
mobile device, go to a.
®
For Windows users (all connections) and Macintosh
users using the USB and wired network connections,
go to b.
a
If you are using a Macintosh computer or a
mobile device on a wireless network, press a to
choose Yes.
Then go to step 9 on page 17 to continue the
wireless setup.
After finishing the wireless setup you will need
to return to step 6 to finish the machine setup.
Note
If you want to change the language on your
machine first, you can choose No and you will be
able to configure the wireless settings later.
b
If you are using a Windows
to connect your Macintosh using USB or wired
network, press b to choose No.
Then go to step 6.
The wireless setup for Windows
covered in later steps.
®
computer or want
®
users will be
5