Entering Text For Wireless Settings - Brother HL-5470DW Quick Setup Manual

For Wireless Network Users
Error code
The machine cannot detect a wireless access point/router that has WPS or AOSS™
enabled.
If you would like to configure your wireless settings using WPS or AOSS™, you must operate
both your machine and the wireless access point/router.
Confirm your wireless access point/router supports WPS or AOSS™ and try starting again.
TS-07
If you do not know how to operate your wireless access point/router using WPS or AOSS™,
see the documentation provided with your wireless access point/router, ask the manufacturer
of your wireless access point/router or ask your network administrator.
Two or more wireless access points/routers that have WPS or AOSS™ enabled are
detected.
TS-08 - Confirm that only one wireless access point/router within range has the WPS or AOSS™
method active and try again.
- Try starting again after a few minutes in order to avoid interference from other wireless
access points/routers.

Entering Text for Wireless Settings

Hold down or repeatedly press the a or b key to select a character from the list below:
(space) !"#$%&'() +,-./0123456789:;<=>?@
ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~
Press OK to confirm the current character and then enter the next character.
Press the Back key to delete the characters you have entered.
Recommended Solutions
27