Configuration In Ad-Hoc Mode (For Ieee 802.11B); Using Configured Ssid - Brother HL-5450DN Network User's Manual

Configuring your machine for a wireless network (For HL-5470DW(T) and HL-6180DW(T))

Configuration in Ad-hoc mode (For IEEE 802.11b)

Using configured SSID

If you are trying to pair the machine to a computer that is already in Ad-hoc mode with a configured SSID,
you will need to complete the following steps:
a
Before configuring your machine we recommend you write down your wireless network settings. You will
need this information before you continue with the configuration.
Check and record the current wireless network settings of your computer you are connecting with.
Note
The wireless network settings of the computer you are connecting with must be set to Ad-hoc mode with
a SSID already configured. For instructions on how to configure your computer to Ad-hoc mode please
see the information included with your computer or contact your network administrator.
Network name: (SSID)
Communication Mode
Ad-hoc
For example:
Network name: (SSID)
HELLO
Communication Mode
Ad-hoc
Note
Your Brother machine supports the use of the first WEP key only.
b
Press a or b to choose Network.
Press OK.
c
Press a or b to choose WLAN.
Press OK.
d
Press a or b to choose Setup Wizard.
Press OK.
e
When WLAN Enable? is displayed, press a to accept.
This will start the wireless setup wizard.
To cancel, press Cancel.
Encryption mode
NONE
WEP
Encryption mode
WEP
Network key
—
Network key
12345
3
3
3
3
32