Konica Minolta bizhub PRO 950 User Manual page 215

PostScript PPD Printer Driver setting (Windows)
Back Cover Tray
Specifies the paper tray for the back cover.
PI Front Cover Tray
Sets a front cover for which the paper is from the [PI Tray 1] or [PI Tray 2].
The [PI Front Cover] cannot be set in the following cases:
- When the [Cover Sheet Feeder] is not selected in the [Device Settings]
tab - [Installable Options]
- When any item other than [Off] is selected for the [Fold].
PI Back Cover Tray
Sets a back cover for which the paper is from the [PI Tray 1] or [PI Tray 2].
The [PI Back Cover] cannot be set in the following cases:
- When the [Cover Sheet Feeder] is not selected in the [Device Settings]
tab - [Installable Options]
- When any item other than [Off] is selected for the [Fold].
Transparency Interleave
Set this item when using the transparency interleave as the paper.
Select either [Print] or [Blank].
Print
Blank
The [Transparency Interleave] cannot be set in the following cases:
- When the [Fine] is not selected in the [Paper/Quality] tab - [Media]
- When the [92-105g/m
Weight]
Interleave Tray
Uses to select the paper tray for Transparency Interleave.
Paper Tray (Transparency Interleave) cannot be set in the following cases:
- When the [Paper Sources] is not selected in the [Device Settings] tab -
[Installable Options]
bizhub PRO 950
This is set when inserting the printed interleaf for the
transparent sheet.
This is set when inserting the blank interleaf for the trans-
parent sheet.
2
] is not selected in the [Advanced Options] - [Paper
9
9-30