Konica Minolta bizhub PRO 950 User Manual page 155

PCL Printer Driver Setting (Windows)
Center Staple and Fold
Staples at the center of the output paper and folds it into half.
The [Center Staple and Fold] cannot be set in the following cases:
- When [FS-611] is not available in [Configure] tab.
Punch
The output paper can be set to be punched with 2 - 4 holes or stream holes.
The position will be changed according with the [Binding Position] setting.
The [Punch] cannot be set in the following cases:
- When [Punch Unit], [Punch Z-Fold Unit] or [Stream Punch] is not available
in [Configure] tab.
- When [Booklet] is selected in [Setup] tab - [Print Type].
bizhub PRO 950
2 Holes / Left Binding
(Portrait)
ABCD
2 Holes / Left Binding
(Landscape)
ABCDEF
2 Holes / Top Binding
(Portrait)
ABCD
Stream Punch / Left Binding
(Portrait)
ABCD
2 Holes / Right Binding
(Portrait)
ABCD
2 Holes / Right Binding
(Landscape)
ABCDEF
2 Holes / Top Binding
(Landscape)
ABCDEF
Stream Punch / Left Binding
(Landscape)
ABCDEF
8
8-38