Chapter 4: Okinet For Tcp/Ip; Chapter 4 Okinet For Tcp/Ip; Overview; System Requirements - Oki B4200 User Manual

Chapter 4
OkiNet for TCP/IP

Overview

This section contains information about OkiNet for
TCP/IP. OkiNet for TCP/IP provides SNMP-based
support for the entire OkiLAN 6020e family of print
servers.
OkiNet for TCP/IP allows you to:
• Easily assign an IP address
• Configure an OkiLAN 6020e for all Supported
Protocols
• Display OkiLAN 6020e Diagnostic Information
• Print a Configuration Sheet
• Reset the OkiLAN 6020e
• Restore Factory Default Settings
• Creating Customized Views
• Modify View Settings
• Permanently Define SNMP Access Information

System Requirements

OkiNet for TCP/IP is a Windows-based program which
is compatible with Windows 3.x, Windows NT/2000 and
Windows 95/98.
OkiNet for TCP/IP requires that the TCP/IP protocol is
running using a Winsock (Windows Sockets) TCP/IP
stack, version 1.1 or greater. A Winsock TCP/IP
protocol stack is available from many vendors
including the following:
• Microsoft
• FTP Software
• Trumpet
• NetManage
• Distinct
For more information on the Winsock TCP/IP stack and
setting up a host name, see the README file.
OKI OkiLAN 6020e User's Guide
Section 4 - Chapter 4 - OkiNet for TCP/IP
IV - 23