The Printer Driver - Oki B4200 Installation Instructions

4. Lift the paper bar (1) and load paper
(up to 500 sheets 20-lb. US Bond).
Keep the stack below the full line (2).
5. Lower the paper bar and push the
tray back into the printer.
Note: To install paper in Tray 1:
a. Open the Tray 2 front panel.
b. Slide Tray 1 out.
AUTOFEED
To set the printer to switch to Tray 2 when
Tray 1 is empty:
B4300:
Set AUTOTRAY on in the print Menu.
B4200:
Go to the Paper tab in the Status Monitor.
Select Auto Tray Switch.
Activate the Tray in

the Printer Driver

®
Windows
PCL Driver
Start ® Settings ® Printers
1. Click
Printers and Faxes
[
The Printers (Printers and Faxes)
dialog box opens.
2. Right click the Oki 4200 or 4300
printer icon, then click
Device Option(s)
3. Click the
Available Tray
4. For , select
Cassette
.
OK
5. Click , then close the Printers
(Printers and Faxes) dialog box.
PostScript Emulation Driver,
(B4300 with Postscript option
installed).
Start ® Settings ® Printers
1. Click
Printers and Faxes
[
The Printers (Printers and Faxes)
dialog box opens.
2. Right click the Postscript
emulation printer icon, then click
Properties
.
3. Next:
– Windows XP, 2000 and NT 4.0:
Device Settings
click the
– Windows Me and 98: click the
Device Options
tab.
4. Then:
– Windows XP, 2000, NT 4.0 and
Installable Options
Me: under
Available Tray
click
– Windows 98: under
setting for Available Tray
2 (1 Optional Tray)
OK
5. Click , then close the Printers
(Printers and Faxes) dialog box.
Macintosh
PostScript Emulation Driver,
(B4300 with PostScript option
installed)
OS 8.x and 9.x
1. Activate
menu.
for XP].
2. Select
3. Click
4. Click
5. Change the
Properties.
2 (1 Optional Tray)
to
tab.
6. Click
Lower
7. Close
OS X.1
No activation is required for
Macintosh OS X.1.
OS X.2
1. Activate
Hard Drive ® Applications ®
Utilities ® Print Center
for XP].
2. Highlight the printer name and
select from the menu
Show Info
3. Click the
drop-down menu and select
Optional Tray)
4. Click
the desktop.
tab.
,
and select 2.
Change
, select
.
®
Chooser
from the Apple
LaserWriter 8
.
Printer ® Setup
.
Configure
.
Available Tray
setting
.
OK
twice.
Chooser
.
Print Center Local
from
.
Printers ®
.
Available Tray
2 (1
.
Apply Changes
and exit to