Brother HL-3075CW User Manual page 61

APIPA
The setting of On will cause the print server to automatically allocate a Link-Local IP address in the range
(169.254.1.0 - 169.254.254.255) when the print server cannot obtain an IP address through the Boot Method
you have set (see Boot Method on page 45). Choosing Off means the IP address doesn't change, when the
print server cannot obtain an IP address through the Boot Method you have set. The default setting for APIPA
is On.
a
Press any of the Menu buttons (+, -, OK or Back) of the control panel on your machine.
b
Press + or - to choose Network.
Press OK.
c
For HL-3075CW
(For wired) Press + or - to choose Wired LAN.
(For wireless) Press + or - to choose WLAN.
Press OK.
d
Press + or - to choose TCP/IP.
Press OK.
e
Press + or - to choose APIPA.
Press OK.
f
Press + or - to choose On or Off.
Press OK.
Control panel features
8
8
51