Brother HL-3075CW User Manual page 59

Gateway
This field displays the current gateway or router address used by the machine. If you are not using DHCP or
BOOTP to obtain the gateway or router address, enter the address you wish to assign. If you do not have a
gateway or router, leave this field blank. Check with your network administrator if you are unsure.
a
Press any of the Menu buttons (+, -, OK or Back) of the control panel on your machine.
b
Press + or - to choose Network.
Press OK.
c
For HL-3075CW
(For wired) Press + or - to choose Wired LAN.
(For wireless) Press + or - to choose WLAN.
Press OK.
d
Press + or - to choose TCP/IP.
Press OK.
e
Press + or - to choose Gateway.
Press OK. The first part of the number will be blinking.
f
Press + or - to increase or decrease the number.
Press OK to go to the next number.
g
Repeat this process until you have set your Gateway address.
h
Press OK to finish the Gateway address.
An asterisk appears at the end of the LCD.
Control panel features
8
8
49