Oki MC360 MFP User Manual page 56

Table 7: Menu Function
LEVEL 2
Fax Setup
ITEM
Clock Adjustment
Basic Setup
MC360 MFP User's Guide
Menu Structure > 56
DESCRIPTION/OPTION
User ID <enter>, Password<enter>
(advance with right arrow key)
Service Bit: On (enables all the fax
settings)/Off
Country Code: select your country
Local Phone No.: enter your local #
Sender ID: enter up to 32
characters
MCF (Single Location): On/Off
MCF (Multi Location): On/Off
Error MCF: On/Off
Image in MCF: On/Off
Auto Trans. Report: On (MCF report
is printed automatically)/Off
Time/Date Print: Off/ Once (Time/
Date printed only on 1st page)/
All (Time/Date printed on all
pages)
A/R Full Print: On (Activity Report
is printed automatically)/Off
Tone for Echo: On/Off
H/Modem Rate: Fax modem
transmission speed 33.6/28.8/
14.4/9.6/4.8 Kbps
Attenuator: (signal sending level)
select 0 to 15 dB
MF Attenuator: (MF signal sending
level) select 0 to 15 dB
TAD Mode: (Telephone Answering
Device) Type1/Type2/Type3
Telephone Priority Mode (sets hard
ringer/soft ringer timing): On (with
Quasi Ring Back Tone Tx started,
Hard Ringer/Soft Ringer starts
ringing)/Off (with 2nd Quasi RBT
Tx started, Hard Ringer/Soft Ringer
starts ringing)
CNG Detection: On (detects a
calling tone in Tel/Fax mode)/Off
T/F Timer Prg: (for TEL/FAX and
TAD modes; auto receive starts if
the phone is not picked up in this
many seconds) 20 sec/30 sec
Remote Receive No.: (a 2-digit dial
number used for Remote Switch)
Off/00/11/... /99/**/##