Cisco PVDM2 24DM - Digital Modem Module User Manual page 6

How to Configure Digital Modem PVDM2s
Configuring the Modem Country Code
To configure the modem country code for a bank of V12 modems, use the modem country v12
command in global configuration mode.
SUMMARY STEPS
1.
DETAILED STEPS
Command or Action
Step 1
modem country v12 country
Example:
Router(config)# modem country v12 t1-default
Configuring Modem Lines for Dial-In and Dial-Out
The following tasks configure modem lines for dial-in and dial-out.
•
•
Configuring Modems for Dial-In
Beginning in global configuration mode, follow these steps to configure modem lines for dial-in.
SUMMARY STEPS
1.
2.
3.
Cisco IOS Release 12.4(9)T, 12.4(11)XW, and 12.4(20)T
6
Cisco PVDM2-12DM, PVDM2-24DM, and PVDM2-36DM Digital Modem Packet Voice Data Modules
modem country v12 country
Configuring Modems for Dial-In, page 6
Configuring Modems for Dial-Out, page 7
line start-range end-range
modem inout
transport input all
Purpose
Configures the modem country code for the bank of V12
modems in your digital modem PVDM2s.
Default for T1 connections is t1-default.
Default for E1 connections is e1-default.
(required)
(required)