Cisco PVDM2 24DM - Digital Modem Module User Manual page 29

Cisco PVDM2-12DM, PVDM2-24DM, and PVDM2-36DM Digital Modem Packet Voice Data Modules
modem country v12
To configure the modem country code for a bank of V12 modems, use the modem country v12
command in global configuration mode. To remove a country code from service, use the no form of this
command.
Syntax Description
country
Command Default
Command is disabled.
Command Modes Global configuration
Command History Release
12.4(9)T
Usage Guidelines The supported codes for the country argument are as follows:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
modem country v12 country
no modem country v12 country
Country name. See Usage Guidelines for a list of the supported country names.
Modification
This command was introduced.
australia
austria
belgium
china
cyprus
czech-republic (Czech/Slovak Republic)
denmark
e1-default (Default E1, a-law)
finland
france
germany
hong-kong
india
ireland
israel
italy
japan
Cisco IOS Release 12.4(9)T, 12.4(11)XW, and 12.4(20)T
modem country v12
29