Selecting The Harmony/Echo Type; Type - Yamaha 503 Reference Manual

Selecting the Harmony/Echo type

You can select the desired Harmony/Echo effect from a variety of types.
1
Press the [VOICE EFFECT] button.
2
Turn the Harmony/Echo on by pressing the [I] (HARMONY/ECHO) button.
3
Call up the operation display by pressing the [J] (TYPE SELECT) button.
4
Use the [1 ▲▼]–[3 ▲▼] buttons to select the Harmony/Echo type.
The Harmony/Echo types are divided into the following groups, depending on the particular effect
applied.
■ Harmony Types
When one of the Harmony Types is selected, the Harmony effect is applied to the note played in the right-
hand section of the keyboard according to the type selected above and the chord specified in the chord
section of the keyboard shown below.
Split Point
Chord section for Style playback
and Harmony effect
Split Point
(for Style playback)
Chord section for
Style playback and
Harmony effect
Harmony Types
These types apply the harmony effect to notes played in the right-hand sec-
tion of the keyboard according to the chord specified in the left-hand section
of the keyboard. (Note that the "1+5" and "Octave" settings are not affected
by the chord.)
Multi Assign Type
This type applies a special effect to chords played in the right-hand section
of the keyboard.
Echo Types
These types apply echo effects to notes played in the right-hand section of
the keyboard in time with the currently set tempo.
Split Point
(for the Voice)
RIGHT 1 and 2
LEFT Voice
Voices
Split Point
RIGHT 1 and 2 Voices
LEFT Voice and chord section
for Harmony effect
CVP-509/505/503/501 Reference Manual
2
5