First, Second, Third, Fourth Sata Master - Asus K8N4-E User Manual

2.3.6 2.3.6 2.3.6

First, Second, Third, Fourth SATA Master

First, Second, Third, Fourth SATA Master First, Second, Third, Fourth SATA Master
2.3.6 2.3.6 First, Second, Third, Fourth SATA Master First, Second, Third, Fourth SATA Master
While entering Setup, the BIOS automatically detects the presence of Serial
ATA devices. There is a separate sub-menu for each SATA device. Select a
device item then press <Enter> to display the SATA device information.
Main
Extended IDE Drive
Access Mode
Capacity
Cylinder
Head
Precomp
Landing Zone
Sector
F1:Help : Select Item
ESC: Exit : Select Menu
The BIOS automatically detects the values opposite the dimmed items
(Capacity, Cylinder, Head, Precomp, Landing Zone and Sector). These
values are not user-configurable. These items show 0 if no SATA device is
installed in the system.
Extended Drive Extended Drive Extended Drive
Extended Drive Extended Drive
Selects the type of fixed disk connected to the system.
Configuration options: [None] [Auto]
Access Mode Access Mode Access Mode
Access Mode Access Mode
Sets the sector addressing mode. Configuration options: [Large] [Auto]
Before attempting to configure a hard disk drive, make sure you have
the correct configuration information supplied by the drive
manufacturer. Incorrect settings may cause the system to fail to
recognize the installed hard disk.
Capacity Capacity Capacity
Capacity Capacity
Displays the auto-detected hard disk capacity. This item is not
configurable.
Cylinder Cylinder
Cylinder Cylinder Cylinder
Shows the number of the hard disk cylinders. This item is not configurable.
A S U S K 8 N 4 - E A S U S K 8 N 4 - E A S U S K 8 N 4 - E A S U S K 8 N 4 - E A S U S K 8 N 4 - E
Phoenix-Award BIOS CMOS Setup Utility
Primary SATA Master
[Auto]
[Auto]
xxxxx MB
xxxxx
xx
xx
xx
xx
-/+: Change Value
Enter: Select Sub-menu
Select Menu
Item Specific Help
Press [Enter] to
select
F5: Setup Defaults
F10: Save and Exit
2 - 1 9 2 - 1 9 2 - 1 9 2 - 1 9 2 - 1 9