Asus K7M-RM User Manual page 27

3. HARDWARE SETUP
3. Insert the cartridge
Push the cartridge's two locks inward until you hear a click (the picture in step 2
shows the locks in the outward position and inward in the picture below).
With the heatsink facing the motherboard's chipset, push the cartridge gently
but firmly into the Slot A connector until it is fully inserted.
Push lock inward
4. Secure the cartridge
Secure the cartridge in place by pushing the cartridge until it is firmly seated on
the Slot A connector.
The SECC locks should be outward when secured so that the lock shows through
the retention mechanism's lock holes.
Lock hole
ASUS K7M-RM User's Manual
CPU fan cable to
fan connector
CPU fan cable to
fan connector
27