Asus K7M-RM User Manual page 21

3. HARDWARE SETUP
External Frequency Table
CPU SDRAM
(MHz) (MHz)
100.00 100.00
103.00 103.00
105.00 105.00
110.00 110.00
NOTE: For updated processor settings, visit the ASUS web site (see ASUS CON-
TACT INFORMATION).
WARNING!
Premature wearing of the processor may result when overclocking.
Be sure that the DIMM you use can handle the specified SDRAM MHz or else
bootup will not be possible.
5) Voltage Regulator Output Setting (VID1, VID2, VID3)
This jumpers allow you to manually adjust the CPU core voltage. It is recom-
mended to use CPU Default as the CPU core voltage. CPU Default means the
Vcore is generated according to the CPU VID configuration. For each jumper
setting, there are two voltage options, depending on the CPU used.
1 0 1 0
K7M-RM CPU Core Voltage
Selection
ASUS K7M-RM User's Manual
Frequency Selection Switches
1
[ O N ]
[OFF]
[ O N ]
[OFF]
1 2
VID3
1 0
VID2
VID1
2/2.05Volts
1 2
VID3
VID2
VID1
1.7/1.75Volts
1 2
VID3
VID2
®
VID1
1.4/1.45Volts
2
[ O N ]
[ O N ]
[OFF]
[OFF]
3 4 1 2 3 4 1 2 3
1.9/1.95Volts 1.8/1.85Volts
3 4 1 2 3 4 1 2 3
1.6/1.65Volts 1.5/1.55Volts
3 4 1 2 3 4 1 2 3
1.3/1.35olts CPU Default
4
4
4
21