Chapter 1: Introduction; Before You Start; Package Checklist - Biostar TA785GE 128M Setup Manual

Setup manual
Hide thumbs Also See for TA785GE 128M:
Table of Contents

Advertisement

CHAPTER 1: INTRODUCTION

1.1
B
Y
EFORE
Thank you for choosing our product. Before you start installing the
motherboard, please make sure you follow the instructions below:
Prepare a dry and stable working environment with
sufficient lighting.
Always disconnect the computer from power outlet
before operation.
Before you take the motherboard out from anti-static
bag, ground yourself properly by touching any safely
grounded appliance, or use grounded wrist strap to
remove the static charge.
Avoid touching the components on motherboard or the
rear side of the board unless necessary. Hold the board
on the edge, do not try to bend or flex the board.
Do not leave any unfastened small parts inside the
case after installation. Loose parts will cause short
circuits which may damage the equipment.
Keep the computer from dangerous area, such as heat
source, humid air and water.
The operating temperatures of the computer should be
0 to 45 degrees Celsius.
1.2
P
ACKAGE
HDD Cable X 1
Serial ATA Cable X 1
Rear I/O Panel for ATX Case X 1
Installation Guide X 1
Fully Setup Driver CD X 1 (full version manual files inside)
FDD Cable X 1 (optional)
USB 2.0 Cable X1 (optional)
Serial ATA Power Cable X 1 (optional)
Note: The package contents may be different due to area or your motherboard version.
S
OU
TART
C
HECKLIST
A780GE/A760GE/A785GE
1

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

A780geA760geA785ge

Table of Contents