Table of Contents
Advertisement
TA75M UEFI BIOS Manual
Bank Interleaving
Bank Interleaving is an advanced chipset technique used to improve memory
performance. Memory interleaving increases bandwidth by allowing simultaneous
access to more than one piece of memory.
Options:
Auto (Default) / Disabled
Channel Interleaving
This item allows you to control the DDR2 dual-channel function.
Options:
Auto (Default) / Disabled
Clock to All DIMMs
This item enables unused clocks to DIMMs even memory slots are not populated.
Options:
Disable Link (Default) / Enabled
MemClk Tristate C3/ATLVID
This item enables or disables the MemClk Tristate function in C3 Mode.
Options:
Disable Link (Default) / Enabled
Memory Hole Remapping
This item allows you to enable or disable the remapping of the overlapped PCI
memory above the total physical memory. Only 64-bit OS supports this function.
Options:
Enabled (Default) / Disable Link
Unganged Mode support
This item controls the DRAM controller ganged (128bit*1) / unganged (64bit*2)
dual-channel operation mode.
installed, using unganged mode can still make it run in dual-channel operation.
Options:
Enabled (Default) / Disable Link
Power Down Enable
This item controls the DRAM power down function.
Options:
Disable Link (Default) / Enabled
If two DRAM modules with different size are
33
Advertisement
Table of Contents
