Installing The Raid Driver During Windows ® Os Installation - Asus CROSSHAIR V FORMULA User Manual

4.5.3. . I nstalling.the.RAID.driver.during.Windows
installation
If you use a SATA optical drive to run the OS installation disk, we strongly
recommend that you install the optical dirve to the SATA connectors 5/6 and set
them to [IDE] mode.
To install the RAID driver for Windows
1. During the OS installation, the system prompts you to press the F6 key to
install
third-party SCSI or RAID driver.
2. Press <F6>, and then insert the floppy disk with RAID driver into the USB floppy
disk drive.
3. When prompted to select the SCSI adapter to install, select the RAID driver
for the corresponding OS version.
4. Follow the succeeding screen instructions to complete the installation.
To install the RAID driver for Windows
1. During the OS installation, click Load.Driver to allow you to select the
installation media containing the RAID driver.
2. Insert the USB flash drive with RAID driver into the USB port or the support
DVD into the optical drive, and then click Browse.
Click the name of the device you've inserted, go to Drivers > RAID, and then
3.
select the RAID driver for the corresponding OS version. Click OK.
4. Follow the succeeding screen instructions to complete the installation.
Before loading the RAID driver from a USB flash drive, you have to use another
computer to copy the RAID driver from the support DVD to the USB flash drive.
4-44
XP
®
Vista or later OS
®
.OS.
®
you have to use another
Chapter 4: Software support