NETGEAR WNDR37AV - Wireless Router For View Installation Manual

Installation Guide
N600 Wireless Dual Band Gigabit Router
WNDR37AV
Package Contents:
N600 Wireless Dual Band Router
WNDR37AV
Resource CD
Wireless-N Router
Ethernet Cable Power Adapter
Step 1A:
Unplug or power off your modem.
Step 1B:
Cable your modem.
DSL
or Cable
Internet
Modem
Step 4:
Power On Your Modem.
Wait until your modem cycles on
(approximately 2 minutes).
Note: If you have a modem with a battery-backup,
remove and re-insert the battery before connecting
your modem to power.
Step 2:
Cable your router.
(not included)
Power on/off
Wireless-N Router
Step 5:
Power On Your Router.
Wait until the power LED
turns solid green.
Step 3:
Cable your computer.
Laptop or Desktop
Computer
N600 Wireless Dual Band Router
WNDR37AV
Resource CD
Step 6:
Insert Your CD.
Click Router Setup and follow
the steps to set up a secure
wireless network.
Note: If your laptop does not have a
"No CD Drive" Installation
CD drive, see
on the back to complete your router setup.